|
Fork Roll Over and Tiering Boxes |
 |
 |
Fork Tiering Box
V-Type Channel legs provide maximum support either
2-way or 4-way fork entry. The top corner tiering
angles provide 4-way tiering safety and prevent boxes
from shifting in either direction when tiered. Clearance
is provided between V-channels for fork or pallet
truck. When ordering, specify 2-way or 4-way entry. |
 |
Fork Tiering or Roll-Over Box
This Box design includes offset tiering channels.
To provide a 3" x 7" opening in the channels
with the boxes tiered, the under clearance would
be 4 inches. 3" x 5" minimum channels used
for 4" wide forks, and the 1/4" plate channels
are used for fork roll-over. This box can be provided
with 3" x 7" fork slots in the sides of
the channels to provide 4-way entry. |
 |
Fork Roll-Over Tiering Box
The 3" x 7" bottom channels will accommodate
6" wide forks. Channels are normally of 1/4" plate
and are available with fork slots in sides to provide
4-way entry. Maximum outside fork dimension determines
the proper channels in extra wide boxes. |
 |
Corner Tiering Angle Leg Box
Provides 8-way entry for fork truck or 4-way entry
by pallet truck. Legs have inside reinforcing angle
that permits tiering brackets. A light duty, inexpensive
tiering box designed for loads up to 2,000 pounds. |
